Cordless SDS-plus type Rotary Hammer
- High-performance 3.0Ah Li-ion battery pack
- 60min. usable and 80min. full charging
- Light weight 3.85kg (incl. battery)
- Hard and soft hammering mode for best results in different materials
- Slow and high speed drilling mode for different materials
- Chisel attachment as standard accessories
- Electric speed control
- Vibration-damping soft rubber grip
- Incl. second battery pac
|Model / Type
||EY7880LP2C / EY7880X
|Battery capacity accord. to IEC (technology)
|Charging time (usable / full charging)
||60 / 80min.
|Speed at no load in rpm
||0 - 920min-1 (rpm)
|Blows per minute
||0 - 2,800 (soft mode)
0 - 4,500 (hard mode)
|Size (W x L x B)
||83 x 319 x 203mm
|Weight (incl. battery)
||2 x battery EY9L82B
incl. plastic box
||Ø 6mm x 30mm
|Ø 8mm x 100mm
|Ø 12.5mm x 40mm
|Ø 14.5mm x 90mm
|Ø 20mm x 40mm
|*** At concrete strength of medium hardness
Easy drilling in concrete with 28.8V rotary hammer
This powerful SDS-Plus Rotary Hammer Drill is capable of drilling holes up to 24mm diameter in concrete and masonry. It also features leading cooling and dust-proofing design to extend the life time of the unit.
Protection - engineered
1: Durable bearing design
All bearing races are sealed and seated into the solid cast magnesium gear housing. This ensures best possible alignment even under load and increases smoothness of running and the durability of the gear box.
2: Magnesium gear housing
Magnesium is very light but extremely strong and rigid. It also leads thermal energy very well ensuring heat dissipation of internal components and supporting long life time of the tool.
3: Vibration protected control electronics
The module is sealed in thick vibration absorbing material to avoid damage through vibration as well as protecting against moisture and dust.
A special gaiter helps seal the switch and further protect against water and dust entering the unit.
5: Cooling and dust protection
A large alloy impeller draws high volumes of air into the unit and channels it to the most active areas of the housing such as hammer and gear wheels. This allows continuous operation even in tough conditions.
4 Drilling modes
4 drilling modes are available with the combination of Hammering/Drilling switching lever and Speed/ Blow mode selection lever. Select the suitable mode for application.
Mode Usage Guide
- 1. High Speed / Hammer On - Fast masonry / concrete drilling
2. Low Speed / Hammer On - Slower, controlled hammer drilling (reduces brick blow)
3. High Speed / Hammer Off - Fast drilling into wood, metal, plastics etc.
4. Low Speed / Hammer Off - Slower, high torque drilling into steel, wood etc.
Support function: dust collection cup
To further protect the unit from dust and help keep the jobsite clean, we offer a special dust collection cup. Also suitable for other units (EY78A1, EY7840, EY6803).
EY7880LP2C / EY7880X - Typical application
General construction, electrical installation, plumbing and heating
With a weight of 3.8kg and a length of only 319mm it is one of the lightest and most compact tools in this performance class. It also features leading cooling and dust-proofing design to extend the life expectancy of the unit.