Multi Impact Drill Driver EY7549LS2S

Overview

Multi-Impact & Drill Driver

  • Multifunction: Drill, Screwdriver, Impact Driver, Impact Wrench
  • Quick change 1/4" hex adaptor
  • New high capacity 14.4V 4.2Ah battery packs
  • Clutch: 21 stages + 1 drilling stage
  • Lightweight 1.85kg
  • ESD approved (as per EN 55014-1 and -2)
Model / Type EY7549LS2S
Voltage 14.4V
Battery capacity accord. to IEC (technology) 4.2 Ah (Li-ion)
Charging time (usable / full) 50 / 60min.
Max. torque Driver mode: 9 / 26Nm (soft joint, high / low)
Impact mode: 130 Nm* / 150 Nm**
* M14 high tensile bolt tightening for 3 sec.
** M16 high tensile bolt tightening for 3 sec.
Speed at no load in rpm low 60 - 380min-1
high 180 - 1,200min-1
Impact in rpm 0 – 2.300min-1
Clutch torque 0.7 – 4.4Nm (0.2 Nm per stage)
Clutch stages 21 + Drill position
Size (W x L x B) 61 x 234 x 210mm
Weight (incl. battery) 1.85kg
Standard accessories Quick change 1/4" hex drive EY9HX110E
2 x battery EY9L45B
EY0L82B
incl. plastic box
Battery capacities
Voltage     14.4V
Model     EY7549LS2S
Drill driver mode Holes in Yellow pine
* Drill driver High
Ø 18mm x 120mm 90 pcs
Impact mode Self drilling screws in SPC Ø 21mm t=1.6mm 19 pcs
HUS Ø 6mm x 60 concrete 450 pcs
Bolting High tensil bolt M12 x 25mm t=10mm 200 pcs

Technology

Multimode - 4 in 1

The Multi-Impact & Drill Driver EY7549LS2 offers 4 driving modes to make light work of a host of applications. Drilling, screwing, impact driving and wrench application can be done with just one tool. No need to take 3 or 4 tools to the job.
It doesn't matter if you're working with wood, metal, masonry fixings or a host of other materials - the new EY7549LS2 will give flexible, efficient support to a wide range of applications. To give exceptional endurance and power, the EY7549 is supplied with 2 x 4.2Ah Li-ion batteries. 1/4" hex impact chucks are also included in the set. With only 1.85kg (inc. battery) the EY7549LS2 will soon become the most handy and versatile power tool in your line up.

1: Comfortable application (impact mode / impact wrench)

2: High power application (impact mode / impact driver)

Working mode

Protection technology

The Tough Tool IP* concept includes features such as sensors which monitor batteries and protect against overheating and ‘over-discharge’. This technology ensures reliable, safe and powerful operation for the user.

1: Switch
Increased sealing helps protect against water and dust.

2: Electronics
The electronic circuits in control panel and battery pack are covered by a urethane layer for added dust and water protection.

3: Battery
The battery cells are designed to avoid intrusion of moisture.

*IP=INTELLIGENT POWER TOOL

EY7549LS2S - Typical application

Fast drilling into metal (DD high), Powerfull drilling (DD low), Comfortable application (impact mode / impact wrench), High power application (impact mode / impact driver)

The all new Multi-Impact & Drill Driver EY7549LS2 offers 4 driving modes to make light work of a host of applications. Drilling, srewing, impact wrench and wrench application can be done with just one tool. No need to take 3 or 4 tools to the job. It doesn't matter if you're working with wood, metal, masonry fixings or a host of other materials – the new EY7549LS2 will give flexible, efficient support to a wide range of applications.

Product downloads